Graupner HoTT SMART-BOX telemetry 33700 Pakket
Graupner HoTT SMART-BOX telemetry 33700 Pakket
Graupner HoTT 2.4-GHz transmission system
59.99
€ 57.50
Op voorraad
Graupner | Artikelcode: 33700
- Productinformatie
- ZENDERS en ONTVANGERS
Description
For the Graupner HoTT 2.4-GHz transmission system, the SMART-BOX is display and programming device in one.
Whether telemetry data are displayed in real time or settings have to be made in your HoTT system,
the generous display with 8 x 21 characters facilitates easy handling.
Four switches are available for operation.
An integrated buzzer to sound acoustic signals and warning tones makes the BOX even more convenientto use.
The attached installation set makes it possible to attach the device to the handle of the hand transmitter,
so that it is optimally positioned for reading telemetry data in real time while you are controlling your model.
Since the SMART-BOX can be updated via the USB connection, you always have the latest software and can utilize future functions.
Telemetry data display
Telemetry data display
- Signal quality
- Range test
- Receiver voltage with adjustable warning threshold
- Transmitter voltage display with adjustable warning threshold
- Receiver temperature with adjustable warning threshold
Important Note when using the modules 33600, 33601, 33610, 33611 and 33620:
Do not carry out any programming work on the sensors while the model is flying,
otherwise there is a real risk that your model will fly out of control while you are not concentrating on it!
If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work during a flight,
If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work during a flight,
as this can alter the settings in the receivers to which no telemetry equipment is connected;
in the worst case this could result in the model crashing!
For this reason always carry out programming on the ground, and check that only the receiver with connected sensors is powered on.
Programming data display
Programming data display
- Country settings
- Servo direction reversal
- Serval neutral position
- Servo path
- Servo cycle time
- Free channel assignment (channel mapping)
- Failsafe settings
- Mixer settings
- Servo test
Specification
Temperature range : - 15 ... 55 °C
All-up weight, approx.: 67 g
Dimensions (LxWxH): 76 x 72 x 17 mm
Charging rate : 80 mA
Operating voltage : 3,6 ... 9 V
All-up weight, approx.: 67 g
Dimensions (LxWxH): 76 x 72 x 17 mm
Charging rate : 80 mA
Operating voltage : 3,6 ... 9 V
