Home    Servo & Toebehoren   Hitec   Analoog Standaard  HITEC HS-785HB Winch servo Karbonite gear 13kg 112785 Pakket
HITEC HS-785HB Winch servo Karbonite gear 13kg 112785 Pakket

HITEC HS-785HB Winch servo Karbonite gear 13kg 112785 Pakket


MAXI SERVO

HS 785 BB Zeil servo met Karbonite tandwielen, kogelgelagerd en universeel servo kabel
MAXI SERVO afmetingen lxbxh 59x29x50 mm
gewicht: 110 gr
kracht: 4,8/6 volt 110/132 ncm
snelheid 4,8/6 volt 1,68/1,38 seconde bij 360 graden


Tags


54.90

€ 51.00


Op voorraad


Artikelcode: 112785

HITEC  HS-785HB Winch servo Karbonite gear 13kg 112785  Pakket


  • Productinformatie
  • Ander Bigscale servo's

LET OP:   Bigscale servo's altijd alleen met signaaldraad  geel/wit op de ontvanger aansluiten.
               Aparte voeding geven via een goede BEC of rechtstreek op 2S Lipo, dit vanwege hoge stroomverbruik!!


Trommel = 43mm
Turns 1260 gr =3,5 turns

Detailed Specifications
Control System:
+Pulse Width Control 1500usec Neutral
Required Pulse:
3-5 Volt Peak to Peak Square Wave
Operating Voltage
4.8-6.0 Volts
Operating Temperature Range:
-20 to +60 Degree C
Operating Speed (4.8V):
1.68sec/360° at no load
Operating Speed (6.0V):
1.4sec/360° at no load
Stall Torque (4.8V):
152.75 oz/in. (11kg.cm)
Stall Torque (6.0V):
183 oz/in. (13.2kg.cm)
Operating Angle:
630 Deg. one side pulse traveling 400usec
360 Modifiable:
Yes
Direction:
Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V):
8mA/idle and 230mA no load operating
Current Drain (6.0V):
8.7mA/idle and 285mA no load operating
Dead Band Width:
8usec
Motor Type:
3 Pole Ferrite
Potentiometer Drive:
Indirect Drive
Bearing Type:
1 Bearing and 1 Oilite Bushing
Gear Type:
All Karbonite Gear
Connector Wire Length:
11.81" (300mm)
Dimensions:
2.32" x 1.14"x 1.96" (59 x 29 x 50mm)
Weight:
3.88 oz.. (110g)




: