Home    Servo & Toebehoren   Hitec   Analoog Standaard  HITEC HS-765HB Sail Control Servo nr. 112765 Pakket
HITEC HS-765HB Sail Control Servo nr. 112765 Pakket

HITEC HS-765HB Sail Control Servo nr. 112765 Pakket




Op voorraad

Artikelcode: 112765

HITEC HS-765HB Sail Control Servo  nr. 112765  Pakket

  • Productinformatie
  • Ander Bigscale servo's

LET OP:   Bigscale servo's altijd alleen met signaaldraad  geel/wit op de ontvanger aansluiten.
               Aparte voeding geven via een goede BEC of rechtstreek op 2S Lipo, dit vanwege hoge stroomverbruik!!

The HS-765HB servo is a great sail servo. The HS-765HB sail arm servo has up to 140 degrees of travel.
Karbonite gears, dual ball bearings combined with a powerful drive motor mean that this servo is one of the best offered, especially for the price.
Comes with heavy duty arms and a 11cm sail arm.
HS-765HB will provide years of reliable service for your R/C sailing applications to 2 meters.

Detailed Specifications;

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.26sec/60° at no load
Operating Speed (6.0V): 0.20sec/60° at no load
Stall Torque (4.8V): 161.09 oz/in. (11.6kg.cm)
Stall Torque (6.0V): 201.36 oz/in. (14.5kg.cm)
Operating Angle: 70 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 230mA no load operating
Current Drain (6.0V): 8.7mA/idle and 285mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: 1 Bearing and 1 Oilite Bushing
Gear Type: All karbonite Nylon Gear
Connector Wire Length: 11.81" (300mm)
Dimensions: 2.33" x 1.14"x 2.05" (59.4 x 29 x 52.2mm)
Weight: 3.6 oz.. (102g)
Heavy Duty Karbonite gears maintain tight tolerances even after thousands of cycles.