Home    Laders & Netvoedingen   230V Laders  SkyRC Sk-100081 E3 Lipo Balance Charger AC Input 2-3s XH Pakket
SkyRC Sk-100081 E3 Lipo Balance Charger AC Input 2-3s XH Pakket

SkyRC Sk-100081 E3 Lipo Balance Charger AC Input 2-3s XH Pakket


Automatische LiPo Lader via XH balancerstekker.


Tags


€ 18.90


Op voorraad


Artikelcode: SK-100081

SkyRC Sk-100081 E3 Lipo Balance Charger AC Input 2-3s XH  Pakket


  • Productinformatie

CHARGE PROCEDURES

SKYRC e3 comes with the built in power supply.
You can connect the AC power cord to the AC socket (100-240V AC) directly.


1)Insert the AC power cord into the charger.Insert the AC cord into a wall socket (100-240V).
2)All LEDs will light green and flash red to indicate the charger is ready to charge.
3)Connect battery balance wire to balance port which is in front side of the charger, after 2 seconds, the charger detects the voltage of the battery and starts to charge.
4)The charger starts charging. The LEDs will glow constant red. If the battery pack is 2-cell, Cell 1 and Cell 2 LEDs will glow constant red; if the battery pack is 3-cell, Cell 1, Cell 2 and Cell 3 LEDs will glowconstant red
5)When a cell is completely charged, its corresponding LED will glow constant green. A 2-cell pack isfully charged when LEDs 1 and 2 are constant green. For 3-cell pack, all LEDs will glow constantgreen to indicate the pack is fully charged.
6)Unplug the battery from the charger and the charge status LED will stay green and flash red whichindicates the charger is ready to charge another battery.

Specificaties
AC Input:100-240VC,50-60Hz
Battery Type: LiPo
Cell Count: 2-3 cells
Charge Current: 1.2A Max
Cell Terminate Voltage: 4.2V ± 0.02V
Circuit Power: 11W ± 10%
Dimension: 88x57x35mm
Weight:103g

Datasheet
Fabrikant : SkyRC